Biamp A4 Manual de usuario

Operation Manual (printable Help file)

Audia-Manual-A4 x 116. _______________________________________________________________________________________________________________________________

Audia-Manual-A4 Control Dialogs Input Device IO indicates which hardware input is associated with that software channel. Gain In compensates for diffe

Component Objects When using AudiaFLEX hardware, an Enable Output Attenuation check-box may be selected when placing an Output block into the Layout f

Audia-Manual-A4 Note: CobraNet Input blocks of less than 8 channels may now be used. When a block is placed into the Layout from the Object Toolbar, a

Component Objects Note: CobraNet Output blocks of less than 8 channels may now be used. When a block is placed into the Layout from the Object Toolbar

Audia-Manual-A4 Fixed 12-Channel Output If standard Audia® or AudiaSOLO hardware is being used, then microphone level outputs are available on 4x12 c

Component Objects In applications where only background noise reduction is desired, AEC can be turned off and no AEC Ref connection is required. Nois

Audia-Manual-A4 The Advanced dialog for newer AEC-2HD cards includes added features. Ref, Mic, and Out display levels at the AEC Ref block and at the

Component Objects EXPO EXPO blocks are similar to CobraNet Output blocks, except they are designed for use with AudiaEXPO hardware specifically and,

Audia-Manual-A4 EXPI-D EXPI-D blocks are similar to CobraNet Input blocks, except they are designed for use with AudiaEXPI-D hardware specifically an

Component Objects EXPO-D EXPO-D blocks are similar to CobraNet Output blocks, except they are designed for use with AudiaEXPO-D hardware specifically

Table Of Contents xi 133. ____________________________________________________________________________________________________________________________

Audia-Manual-A4 The Receive block provides an output mix of incoming audio and internal ring tone signals. Also, a Hook Switch (HS) control input

Component Objects Double-clicking the Transmit block produces a control dialog box. Output provides level adjustment and muting of outgoing audio si

Audia-Manual-A4 Device IO indicates which hardware input is associated with that software channel. Keypad (1~#) allows number entry via computer mouse

Component Objects Double-clicking the Control/Status block produces a control dialog box. Device IO indicates which hardware input is associated with

Audia-Manual-A4 Double-clicking the Receive block produces a control dialog box. Device IO indicates which hardware input is associated with that s

Component Objects The Status window displays caller ID information when a call is received or error information if the card suffers an error condit

Audia-Manual-A4 96 Right-clicking over buttons 1~16 provides a dialog box for entering speed-dial numbers and labeling. Double-clicking over a prev

Component Objects 97 Dialing Timeout - This is the amount of time (in seconds) the card will wait after the last dialed digit before sending the call

Audia-Manual-A4 NETWORK The items on the Network tab of the Advanced Settings Dialog are only editable when Audia Software is not connected to a sy

Component Objects PROTOCOL The items on the Protocol tab of the Advanced Settings Dialog are only editable when Audia Software is not connected to

Audia-Manual-A4 xii 149. _____________________________________________________________________________________________________________________________

Audia-Manual-A4 Outbound Proxy Port – This value should be provided by the network administrator (default is 5060). Values in the range of 0 to 65535

Component Objects STATUS This display window provides an overview of many relevant network settings. When disconnected, a message appears in the Net

Audia-Manual-A4 cannot exceed 120 Watts. Device IO indicates which hardware output is associated with that software channel. Fault L & T indica

Component Objects buttons for page routing, as well as logic control output nodes indicating button activity. Logic control output nodes are always pr

Audia-Manual-A4 Mixers Mixers These Component Objects provide typical audio mixing functions, in five categories: Standard Mixers; Matrix Mixers; Aut

Component Objects Control Dialogs Auto Mixers Mute In turns the input signal on/off. Level In adjusts the relative input volume. Ch / Bus assigns in

Audia-Manual-A4 Channel Settings affects individual channel settings, but may be applied to all channels. Manual turns on/off channel gating. NOM Gai

Component Objects Matrix Mixers Mute In turns the input signal on/off. Level In adjusts the relative input volume. Ch / Bus assigns inputs to specifi

Audia-Manual-A4 When a Room Combiner is placed, an Initialization Properties dialog box appears for creating physical relationships between rooms. The

Component Objects Once a Room Combiner is placed, the Control Dialog Box is available, which displays the overall space, including zones, partitions,

Table Of Contents xiii 164. __________________________________________________________________________________________________________________________

Audia-Manual-A4 Once a Component Object is placed into the Layout, all available settings can be accessed by double-clicking over the object. This pro

Component Objects Graphic Equalizer Active Band selects the current band to be adjusted. Center Freq. displays the center frequency for the current

Audia-Manual-A4 Feedback Suppressors behave like automatic cut-only parametric equalizers. They utilize 'floating' bands of equalization whi

Component Objects Control Dialogs High Pass Filter Filter / Slope selects the type (Linkwitz-Riley or Butterworth) and slope of the filter. Cutoff F

Audia-Manual-A4 High Shelf Filter Gain selects the amount of maximum cut or boost applied by the filter. Cutoff Freq. selects the cutoff frequency f

Component Objects All-Pass Filter All-Pass Filters are so named because they do not affect frequency response. Instead, they affect signal phase only

Audia-Manual-A4 Once a Component Object is placed into the Layout, all available settings can be accessed by double-clicking over the object. This pro

Component Objects 3-Way Crossover Input Level provides muting and level adjustment for the input. Output Range selects the Low, Mid, or High frequen

Audia-Manual-A4 Input Level provides muting and level adjustment for the input. Output Range selects the Low, Low-Mid, Mid-High, or High frequency out

Component Objects Control Dialogs Leveler Levelers are automatic gain controls, which affect long-term average levels. Response Time determines how

Audia-Manual-A4 xiv 180. _____________________________________________________________________________________________________________________________

Audia-Manual-A4 Ducker Duckers provide level attenuation, triggered by signal or logic inputs. Input Level provides muting and level adjustment for

Component Objects Ambient Noise Compensator Ambient Noise Compensators automatically adjust program volume in response to changes in background noise

Audia-Manual-A4 ANC Setup Procedure Connections  Feed the "program" signal into the Program Input (top left) of the ANC block. Setup of

Component Objects  Adjust the Ambient Response time to determine how quickly the Ambient Input detector responds to changes in the Ambient Input si

Audia-Manual-A4 Right-clicking over the object provides a pop-up menu of options. Control Dialogs Router Routers allow each input to be assigned to

Component Objects Double-clicking the block produces the control dialog. Listed by input are the connected Networked Paging Station-1 blocks, with St

Audia-Manual-A4 Delays Delays These Component Objects provide typical audio time-delay functions. Delays may be connected between any components wi

Component Objects Controls Controls These Component Objects provide both internal and external control functions. Level Controls, Mute Buttons, and I

Audia-Manual-A4 Right-clicking over the object provides a pop-up menu of options. Control Dialog Boxes for Level, Invert, Mute, and Preset related com

Component Objects Level Inc/Dec Level Inc/Dec blocks are identical to Level blocks, except they also provide control input nodes for making increment

Table Of Contents xv 197. ____________________________________________________________________________________________________________________________

Audia-Manual-A4 Mute Button Mute turns on/off the channel. Identifier provides a custom label, when the dialog box is minimized (see below). Righ

Component Objects Most Logic Gates have no Control Dialog Boxes. They are used only to customize behavior of other control functions in the system. Lo

Audia-Manual-A4 NOTES: NOT and Flip Flop gates have only a single input per output, whereas most other gates have multiple inputs, up to 8. Flip Flop

Component Objects Command String blocks allow serial control of external devices via the Serial Control Port. Control input nodes along the top of the

Audia-Manual-A4 Double-clicking the Event Scheduler block produces a Control Dialog. An Event menu (on the left) allows up to eight Schedules to be

Component Objects Volume 8 The Volume 8 is an external control device, which allows adjustment of eight selectable Audia volumes. Volumes can be ind

Audia-Manual-A4 Volume 8 controls fit most US standard single-gang back-boxes (back-boxes are available separately from Biamp Systems). Custom Control

Component Objects Volume/Select 8 The Volume 8 is an external control device, which combines the functions of both Volume 8 and Select 8 controls

Audia-Manual-A4 and associated with their corresponding component blocks within the layout (see Equipment Table). Voltage Control Box The Voltage Cont

Component Objects External controls must be identified (see Device Maintenance) and associated with their corresponding component blocks within the la

Audia-Manual-A4 xvi 208. _____________________________________________________________________________________________________________________________

Audia-Manual-A4 When maximum and minimum potentiometer settings have both been recorded, this screen will indicate the voltage measurements and prompt

Component Objects Logic Box behavior can be altered using Logic Gates. Please refer to the 'Installation Guide' (included with controls), o

Audia-Manual-A4 Control Labels The Volume 8, Select 8, and Volume/Select 8 controls all come with a sheet of clear, adhesive-backed labels, for custo

Component Objects In the Word document, select Show Gridlines from the Table menu. Each large cell represents a label. The first four columns are &a

Audia-Manual-A4 surfaces (see Customizing Component Objects). Peak Meter A peak-reading meter & numeric display indicate signal level. Hold Time

Component Objects Generators Generators These Component Objects provide sine-wave, sweep, pink-noise, and white-noise generator functions. Generators

Audia-Manual-A4 Pink Noise Generator Mute turns on/off the generator. Level determines generator output level. Right-clicking over certain setting

Component Objects Control Dialogs Transfer Function Transfer Function may be connected between any two component outputs on the same signal path, for

Audia-Manual-A4 Control Dialogs Pass-Through Pass-Through blocks allow wiring nodes to be strategically placed, so audio or control (logic) signa

Component Objects LPT stands for Logic Pass-Through. This example shows a 2-channel Audio Split Pass-Through. Split Pass-Through Output More tha

Table Of Contents xvii 226. __________________________________________________________________________________________________________________________

System Design Placing Component Objects System design begins with the placement of Component Objects into the Layout. This can be done in two ways. T

Audia-Manual-A4 To make a connection, click on a Node, move the mouse to a corresponding Node, and click again to place a Line Object (wire). Multiple

System Design see Input Output see Mixers see Equalizers see Filters see Crossovers see Dynamics see Routers see Delays see Controls see Meters see Ge

Audia-Manual-A4 Multiple component objects may be merged together using the Custom Blocks menu. Custom Blocks can then be copied to the Processing L

System Design Compile also attempts to 'group' simple DSP blocks together, reducing the number of DSP blocks to be allocated to the availabl

Audia-Manual-A4 The assignment of channel numbers to Audio Input and Output blocks has been modified. It is still the exclusive function of the compil

System Design Explanation: A source, other than an Auto Mixer Main Output, is connected to a Mix-Minus Combiner input. Mix-Minus Combiners allow Au

Audia-Manual-A4 'Ignore' is selected, then the warning "Ignored '...' (object code '...') at [__, __]" wil

System Design Once reset, Compile will automatically re-assign channel numbers. Message: Nothing to compile ! Explanation: All objects placed in l

Audia-Manual-A4 xviii 240. ___________________________________________________________________________________________________________________________

Audia-Manual-A4 Unit #__ has no CobraNet communication module. Too many CobraNet inputs or outputs allocated to unit #__. Explanation: The number

System Design Explanation: AEC Reference blocks cannot connect to their own AEC Input blocks since this would amount to a feedback. Messages: DSP

Audia-Manual-A4 Explanation: The specified group requires so many links to other groups that it would exceed the limitations of CobraNet. Normally,

System Design Message: Allocating blocks to DSPs...failed to set up a feasible DSP task schedule in the unit #__. Explanation: Although the total DS

Audia-Manual-A4 Message: Could not assign audio I/O channels in the unit # __. Explanation: Indicates a software problem. Please contact Biamp Syste

System Design System Network Considerations The computer must have a 10/100 BaseT network card (NIC) installed. When connecting directly to the Ethern

Audia-Manual-A4 The computer must be assigned an IP address (under Network Card Settings>Properties). Most computers set TCP/IP address automati

System Design The System Connect screen provides a System List (configured devices only) and a Device List (all configured and non-configured devices)

Audia-Manual-A4 Auto Mixer, Ducker, Leveler, and Comp/Limiter functions are triggered by input signals that exceed a specified threshold. With Level

System Design 169 Applications Application Bulletin (.pdf) files are available in the DOCS folder on the Audia software CD-ROM. The associated design

Table Of Contents xix 258. ___________________________________________________________________________________________________________________________

Hardware Rear Panel Connections Audia® hardware is represented by three different chassis models: standard Audia; AudiaSOLO; and AudiaFLEX. Standard

Audia-Manual-A4 Inputs & Outputs: Inputs & outputs are provided on balanced plug-in barrier-strip connectors. For unbalanced input, wire high

Hardware Front Panel Indicators Front Panel Indicators: The Front Panel Indicators (I/O, Com, & Status) are 2-color LEDs. The following t

Audia-Manual-A4 CAN bus error No IP address defined (cleared by setting an IP address) Status LED: red Configuration error Last configuration unsucc

Hardware See AudiaEXPI & AudiaEXPO operation manual for more complete information. AudiaEXPI-D and AudiaEXPO-D are digital expanders for AUDI

Audia-Manual-A4 AudiaEXPI-4 and AudiaEXPO-4 are analog i/o expanders for AUDIA. AudiaEXPI-4 accepts four channels of analog audio input and provides f

Hardware 177

System Control Software User Interface Once a system design is compiled and downloaded into Audia® devices, the system can be controlled in real-time

Audia-Manual-A4 Remote Control Bus Remote Control Bus provides the connection for Volume 8, Select 8, Volume/Select 8, Voltage Control Box, and Logic

System Control 181

Audia-Manual-A4 Remote Control Bus Hub The Remote Control Bus Hub provides eight parallel ports for the connection of remote control devices to an Au

System Control For control of Audia, Biamp created ATP (Audia Text Protocol). This simply means that Audia will accept strings of ASCII characters to

Audia-Manual-A4 Example: A string to turn up (increment) a Crosspoint on a Matrix Mixer: INC 2 MMLVLXP 4 3 2 1 <LF> The individual components

System Control Audia can be controlled using Telnet via TCP/IP. The same command strings that are used for RS-232 Control are used for Telnet. When

Audia-Manual-A4 SETL and GETL can be used if negative numbers and/or decimals are not supported by a control system. SETL – Tells Audia that a DSP

System Control Device Number An Audia Device Number represents the physical Audia box’s defined address. The Audia software automatically sets this n

Audia-Manual-A4 The Device number that a DSP block has been assigned to can be determined in 3 ways: First Way: 1. Right click on the DSP block an

System Control Attribute The Attribute defines the portion of the DSP block to be controlled (fader level, crosspoint mute etc). The following tables

Introduction AudiaFUSION .AudiaFUSION Networked Amplified Processor is an 8-channel modular amplifier with CobraNet digital I/O, digital signal pro

Audia-Manual-A4 * Can contain a decimal number. Example: Set Device 1 Input Level at Instance ID 6, Input 3 to –10dB. Command Dev # Attribute In

System Control SET 1 AECNLP 24 3 None 3 <LF> Result: SET 1 AECNLP 24 3 3 <LF> Analog Outputs Attribute Commands Index Value Range

Audia-Manual-A4 Polarity 1 = inverted Gain AMPGAIN SET, SETL, GET, GETL, INC, DEC 2 0 ~ 24 Clip Limiter AMPCLIPLIM SET, GET 2 0 = disabled 1 = en

System Control Speed Dial Entry to Dial TISPEEDDIAL DIAL None 1 ~ 16 Phone Number to Dial TIPHONENUM DIAL None enter the phone number Redial TIL

Audia-Manual-A4 Example: Set Device 1 TI-2 Speed Dial Entry at Instance 23 Speed Dial 16 to 1-800-826-1457. Command Dev # Attribute Inst ID Inde

System Control Suppresion 1 = on * Can contain a decimal number. TI-2 Transmit Attribute Commands Index Value Range Transmit Level TITXLVL SET

Audia-Manual-A4 Output CobraNet TX Bundle CNOUTBNDL SET, GET None 1-65279 CobraNet Output Level CNOUTLVL SET, SETL, GET, GETL, INC, DEC 2 -100 ~ 0

System Control * Can contain a decimal number. AudiaFUSION Attribute Commands Index Value Range FUSION Output Mute FUSAMPMUTE SET, GET 2 0 =

Audia-Manual-A4 Note: Typically, Index1 represents the input/row, and Index2 represents the output/column. However, Automixers have only a single out

System Control Input Mute SMMUTEIN SET, GET 1 0 = unmuted 1 = muted Output Mute SMMUTEOUT SET, GET 2 0 = unmuted 1 = muted Crosspoint Mute SM

Audia-Manual-A4 Group Logic Outputs is used when Enable logic outputs is checked to determine what complement of logic outputs are provided on the Aud

Audia-Manual-A4 Result: SET 1 RMCMBWALL 4 2 1 <LF> Mix-Minus Combiner Attribute Commands Index Value Range Group State MCMBGROUP SET, G

System Control Center Freq. PEQFCBND SET, SETL, GET, GETL, INC, DEC 1 20 ~ 20000 EQ Band Level PEQLVLBND SET, SETL, GET, GETL, INC, DEC 1 -30 ~ 15

Audia-Manual-A4 Cut-Off Freq. HPFLTFC SET, SETL, GET, GETL None 20 ~ 20000 * Filter Bypass HPFLTBYP SET, GET None 0 = active 1 = bypassed * Ca

System Control SET 1 HSFLTGAIN 100 None None -10 <LF> Result: SET 1 HSFLTGAIN 100 –10 <LF> All-Pass Filter Attribute Commands Inde

Audia-Manual-A4 Cut-Off Freq. XOVR4FC SET, SETL, GET, GETL 1 20 ~ 20000 * Can contain a decimal number. Notes: 2-way crossover: Index1 = 1 i

System Control Result: GET 2 XOVR3FC 40 1 <LF> Dynamics Blocks Leveler Attribute Commands Index Value Range Bypass LVLRBYP SET, GET Non

Audia-Manual-A4 Noise Gate Attribute Commands Index Value Range Bypass NGBYP SET, GET None 0 = active 1 = bypassed Output Gain ANCGAIN GET

System Control Result: SET 1 RTRMUTEXP 98 4 5 0 <LF> Source Selection Attribute Commands Index Value Range Source SRCSELSRC SET, GET, SE

Audia-Manual-A4 Delay in Meters DLYM SET, SETL, GET, GETL None 0 ~ block maximum * Delay in Inches DLYIN SET, SETL, GET, GETL None 0 ~ block m

System Control Presets Attribute Commands Index Value Range Preset PRESET RECALL None 1001 ~ maximum number of presets Note: Instead of SET, S

Introduction When failover occurs, any received ATP command strings intended for the Primary Channel are automatically routed to the Secondary Channel

Audia-Manual-A4 Command Dev # Attribute Inst ID Index 1 Index 2 Value Line Feed GET 1 RMSMTRLVL 48 1 None None <LF> Result: GET 1 RMS

System Control The property sheet can only be accessed in an off-line screen. **Note** Audia software will assign an Instance ID number to each DSP

Audia-Manual-A4 In an Auto Mixer on Device 2 we are decreasing the level of output 1 on instance ID 6 by 2dB. Index2 is used to represent the output n

System Control *When GET is used, a Value will not need to be specified since GET is a request command. A Value must be set in order for SET, INC, D

Audia-Manual-A4 Examples: Command = SETD 1 IPADDR 192.168.1.197 Response = #SETD 1 IPADDR 192.168.1.197 +OK Command = GETD 1 IPADDR Response = #GETD

System Control Note: Audia's control network can be easily shared on an existing network without compromising network bandwidth, but CobraNet®

Audia-Manual-A4 Presets Once Presets are created, Preset buttons can be placed on screen and used to easily recall different scenarios. Meters

System Control HyperTerminal is a useful tool that comes with Windows® and can be used for RS-232 purposes. Simply open a HyperTerminal session by goi

Audia-Manual-A4 Windows® is a registered trademark of Microsoft Corporation. IP Address Commands Audia has some useful IP and reset tools that m

System Control Get/Set IP Address By typing "GET 0 IPADDR <LF>" in HyperTerminal Audia will reveal the IP Address it is set to. Sub

Audia-Manual-A4 Device I/O indicates which hardware input is associated with that software channel. If Device failover or Channel failover is in u

Audia-Manual-A4 If an Audia does not have a system loaded into it, you can set the Default Gateway IP Address via the RS-232 port. Example: "SET

Index 221

2 2-Way Crossover Control Dialog ... 95 3 3-Way Crossover Control Dialog ... 96 4 4-Way Cro

Index EXPO ... 70 EXPO-D ...

Audia-Manual-A4 Options... 52, 54 Order...

Index 225 Volume 8 Control Dialog... 110 Volume/Select 8 Control Dialog... 112 W

Introduction Channel Failure (CF) Alarm indicates that a hardware failure of the amplifier module has occurred. Audio will be stopped on that channel

Audia-Manual-A4 Frequency Band Setup is a dialog window that contains parameters for defining frequency bands over which impedance monitoring should o

Introduction Auto Mixer Combiner blocks enhance the capabilities of Auto Mixers in room combining, mix-minus, and input expansion applications. Aut

Audia-Manual-A4 connection will cause the Source Selection block to switch to the corresponding audio input channel, and the corresponding logic out c

Introduction All programmed panel functions are assigned using the control dialog box, which is produced by double-clicking the RED-1 block. A li

Table Of Contents Initialization Properties 1 AudiaFUSION Block 3 AudiaFUSION Control Dialog Window 3 1. _________________________________________

Audia-Manual-A4 AEC-2HD Balanced IP-2 Un-balanced IP-2 Un-balanced stereo to two un-balanced inputs OP-2e Balanced Output Un-balanced Output 1

Introduction PA-2 Speaker output 4Ω or 8Ω PA-2 Speaker output Bridged-Mono Mode 4Ω or 8Ω Telephone Interface. Note That Two Telco Lines Are Used In

Audia-Manual-A4 Hookstate VOIPHOOKSTATE SET, GET 1 0 = off-hook 1 = on-hook Digit(s) to Dial VOIPPHONENUM DIAL 1 enter the phone number Last Numbe

Introduction DIAL commands received after the call is connected are sent immediately (as DTMF tones). The dialer can insert delay while sending DTMF

Audia-Manual-A4 Below are some examples of possible string usage: 1. Basic Dialing with timeout to send, talk, and then end call locally with en

Introduction END 1 VOIPCALL 104 1 4. Incoming call & answer and end locally

Audia-Manual-A4 Audia is a Digital Audio Platform, which provides distributed digital audio, signal processing, and control. Audia is a networkable,

Introduction  Six 60 MHz 32-bit floating point Analog Devices SHARC DSPs (360 MFLOPS)  80 MHz 32-bit Motorola Power PC host processor  32 Mbytes

Audia-Manual-A4  Special text block object to enter freeform text and label information  Easy-to-use tools for object alignment, sizing, packing,

Introduction The Digital Audio Platform shall be AUDIA®. AudiaSOLO Digital Audio Platform ARCHITECT'S & ENGINEER'S SPECIFICATION The Di

Audia-Manual-A4 15. _____________________________________________________________________________ 29 Format Toolbar16. _____________________________

Audia-Manual-A4 Each hardware configuration shall include six 60MHz 32-bit floating point DSPs. Software shall be provided for creating/connecting DSP

Introduction The Output Expander shall provide eight channels of digital audio input via CobraNet®, on two rear panel RJ45 connectors. Internal digita

Audia-Manual-A4 The Digital Output Expander shall be represented as a functional block within AUDIA® software, for easy inclusion into system designs.

Introduction 23 7. No agent, employee, distributor or dealer of Biamp Systems is authorized to modify this warranty or to make additional warranties o

Software Tools Basic Screen Elements The main screen of the Audia® software has several sections. The Layout occupies the largest portion of the ma

Audia-Manual-A4 Layout The Layout occupies the largest portion of the main screen, at the lower-right. This is the area where system design actuall

Software Tools Bird's Eye View The Bird's Eye View provides a thumb-nail sketch of the entire system design, to aid navigation within th

Audia-Manual-A4 A Processing Library of available Component Objects is displayed, at the lower-left of the main screen. The Component Objects are org

Software Tools Each category is represented by an icon, with a drop-down menu to the right. To place a Component Object, first choose the appropriat

Table Of Contents 29. _____________________________________________________________________________ 32 Layout Toolbar30. ___________________________

Audia-Manual-A4 Bold Changes the selected text to a thicker version of the chosen font. Italic Changes the selected text to an italicized version of

Software Tools Left-clicking the icon applies the color which was selected last. Text Color Provides a drop-down menu for changing the text color in

Audia-Manual-A4 Hatch Style Provides a drop-down menu for changing the hatching style within the selected Component or Text Objects. Left-clicking

Software Tools Layout Property Sheet Provides an editable table of attributes regarding the Layout. Only Display Attributes are shown for the Layout.

Audia-Manual-A4 group of selected components (multi-selection) to appear on the menu. Object Property Sheet Both Display and DSP Attributes are show

Software Tools inputs/outputs on a component. On most component blocks, this labeling appears only when the cursor is over the associated node. A M

Audia-Manual-A4 Provides an editable table of Layer properties. Layers can be used to separate a Layout into multiple parts. The Layers can be organiz

Software Tools Decreases magnification of Layout in 25% increments. Zoom 1:1 Returns magnification of Layout to 100%. Zoom Level Provides a drop-dow

Audia-Manual-A4 Left-clicking the icon applies the alignment which was selected last. Center In View Provides a drop-down menu for centering the Lay

Software Tools Left-clicking the icon applies the sizing which was selected last. To Front Or Back Provides a drop-down menu for changing the order

Audia-Manual-A4 49. ____________________________________________________________________________ 39 Network Toolbar50. _____________________________

Audia-Manual-A4 Disconnect Ends communications with all Audia® devices on the network. See System Network Considerations. Connect To System Establis

Software Tools Sync Data Re-synchronizes the software with all connected Audia® devices in the system. NOTE: An 'Auto-Update' feature now a

Audia-Manual-A4 Device Maintenance Dialog Box Device Information provides information (such as firmware version, input/output configuration, etc.) re

Software Tools When a valid firmware file is selected, a dialog window is produced that shows all discovered devices in a table with columns indicat

Audia-Manual-A4 Set Device ID allows the selected remote device to be given a name that matches that of the corresponding block in the design layo

Software Tools Set IP Address allows the selected remote device to be assigned an IP address. Use the default setting (which allows the device to obt

Audia-Manual-A4 Set IP Address Audia IP Configuration assigns a device IP Address such as 192.168.1.X (where range of X = 1~254). The factory defaul

Software Tools The Advanced button opens the Change Time Server IP Address screen, which allows specific SNTP servers on the network to be designated

Audia-Manual-A4 Remote Ethernet Devices Paging Station Devices opens a list of Networked Paging Station-1 devices connected to the CobraNet network of

Software Tools Tools New Begins a new Audia® system design file (.DAP). Open Opens an existing Audia® system design file (.DAP). Save Saves the cur

Table Of Contents 64. ___________________________________________________________________________ 48 Standard Toolbar65. ___________________________

Audia-Manual-A4 Cut Removes the selected object(s) from the Layout, and places them in the Clipboard. Copy Places a copy of the selected object(s) i

Software Tools Main Menus Main Menus The Main Menus provide most of the toolbar functions mentioned previously, in Basic Screen Elements, as well as

Audia-Manual-A4 Opens an existing Audia® system design file (.DAP). Export Allows the Audia® Layout to be exported in different file formats. DXF form

Software Tools but it may not find the best solution or not find any solution. In the Extended mode, the compiler performs more profound analysis of t

Audia-Manual-A4 Print Preview Previews printing results based on Print Setup. Print Setup Opens a print dialog box to adjust printer settings. Recent

Software Tools Menu Items Undo Will undo last operation. Redo Will redo most recent Undo operation. Cut Removes the selected object(s) from the Lay

Audia-Manual-A4 Paste DSP Data Places a copy of the DSP data from the Clipboard into the selected Component Object. DSP Data represents the current se

Software Tools View Menu View Menu Toolbars provides a drop-down menu to turn on/off any of the toolbars (see Basic Screen Elements). Also, the appear

Audia-Manual-A4 Presets Menu Presets Menu Select any function from the menu shown below for more information Menu Items Create/Edit/Recall Provides

Software Tools A tab at the upper-right of the Create/Edit Preset dialog box provides additional functions. Next ID and Prev ID allow selection from

Audia-Manual-A4 76. ________________________________________________________________________________ 51 Main Menus77. ______________________________

Audia-Manual-A4 Recall Provides the Recall Preset dialog box, for recalling existing presets. Recall Preset will retrieve all settings stored in the s

Software Tools Menu Items Create Custom Block Document Create Custom Block Document opens a new DAP file, and a Create Custom DSP Block screen determi

Audia-Manual-A4 Control settings also remain part of any Custom Block which has been copied into the Processing Library. These control settings may

Software Tools Tools Menu Tools Menu Select any function from the menu shown below for more information Menu Items Passwords Provides the Set Passwo

Audia-Manual-A4 NOTE: You must first Send Configuration to a device before a Password can be assigned. Passwords cannot be assigned to non-configured

Software Tools An RCB tab at the lower-left of the Equipment Table dialog box provides an editable table of devices connected to the Remote Control B

Audia-Manual-A4 Layout Compile Results Provides the most recent Compile results, with a list of chassis, cards, expanders, and RCB devices included i

Software Tools Clicking on CobraNet Info provides a spreadsheet of CobraNet® channels used in the system. The upper row and left column are the Audia

Audia-Manual-A4 General Options Allows Data Files (system designs) and Processing Libraries (Component Objects) to be saved to specified directory loc

Software Tools Compile Options Allows Auto Device Add to be disabled, or Audia® device type preference to be specified (guides Compile function in de

Table Of Contents ix 98. _____________________________________________________________________________ 56 Paste DSP Data99. ________________________

Audia-Manual-A4 Network Options Network Device Discovery Method allows the user to choose a method to Connect To Network. UDP Broadcast is the defaul

Software Tools Edit Device List allows creation of the TCP User Supplied Device List. Use Add to create a new entry, double-click under Subnet Addres

Audia-Manual-A4 Default Network Interface Card allows selection of a specific network interface card (NIC), when multiple cards are available on the

Software Tools Layout Menu Layout Menu Most Layout Menu items duplicate functions found in the Layout Toolbar. However, some exceptions are as follows

Audia-Manual-A4 Object Sheet Provides a list of all objects within the Layout. Normally, objects can be selected sequentially using the Tab key. The O

Software Tools Help Menu Help Menu Provides Audia® Help Topics and About Audia information. Status Bar Status Bar The Status Bar, along the bottom

Audia-Manual-A4 Ctrl + F4 close document Alt + F4 close application cut/copy/paste – for selected object(s) Ctrl + C copy selected objects Ctrl +

Software Tools 77 Shift + L Delays Shift + T Controls Shift + M Meters Shift + G Generators Shift + N Diagnostics Shift + 1~0 Custom Processing

Component Objects Input Output Input Output These Component Objects provide the audio inputs/outputs (I/O) to the system. Analog and CobraNet® (digi